71
CAD Plan Design / Re: Auto cad colours
« Last post by admin on 13 October 2021, 09:34 »The default is print by page colour. The print figure colour will bypass the print by page colour and print the figure as it appears on the screen.
Check this page for latest ElectricalOM downloads: https://electricalom.com/site/eom_download.php
There is something I do not understand.
1. SSB 2
I have a switchboard SSB 2. There are 2 incoming to this switchboard – 1 from MSB and the other from EMSB
I created the feed from MSB. I then create tye EMSB and connect this EMSB to SSB 2. This feed is supposed to be the primary feed.
Problem noticed:
• Physically I have no objection over the display. However:
• When I change the breaker in the EMSB for SSB 2, it does not reflect the change I had done.
• I believe the change is for the CB at MSB
Other problem
• At EMSB, I noted that I cannot shift the feeder for SSB 2 to a location I wanted. It stayed at the location I created the connection to SSB 2
• The SLD on the left do not reflect the circuit breaker to SSB 2 from EMASB although the feed from MSB is clearly indicated
Please advise whether what I experience was a result of using the program or that I did not follow the steps correctly.