ElectricalOM Forum
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
New version ElectricalOM v2023.12:
https://electricalom.com/site/v2023_12.php
Home
Help
Search
Login
Register
ElectricalOM Forum
»
ElectricalOM Support
»
ElectricalOM for Advanced Users
»
Surge Protection Kit
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Surge Protection Kit (Read 1997 times)
mbd-uk
Newbie
Posts: 12
Karma: +0/-0
Surge Protection Kit
«
on:
10 December 2023, 16:25 »
Where the supplier provides surge protection as a kit, is it possible to install the SPD as a direct connection, without using a way number.
This application is a single phsase consumer unit
Logged
Mert
Administrator
Newbie
Posts: 41
Karma: +5/-0
Re: Surge Protection Kit
«
Reply #1 on:
11 December 2023, 05:23 »
Hi,
You can try to select the board you want the SPD protect, and navigate to Protective Devices tab of the Circuit Editor. You will see subordinate tabs one of them is Surge protection. You can tick the Use SPD at Incomer box and this will insert an SPD at the incomer side of the selected board.
Regards.
«
Last Edit: 11 December 2023, 05:24 by Mert
»
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
ElectricalOM Forum
»
ElectricalOM Support
»
ElectricalOM for Advanced Users
»
Surge Protection Kit