Author Topic: Cad Plan Design - Wiring Connections  (Read 3454 times)

Offline RCDGuy

  • Newbie
  • *
  • Posts: 22
  • Karma: +0/-0
Cad Plan Design - Wiring Connections
« on: 05 October 2021, 13:27 »
Ran into problem were in designing a circuit the wire loses either its Starting or Ending connections. See attached "Wire_Properties.JPG" for an example.

When the wire is moved and brought back to the original position, the missing field is then filled in again. Is there a way to set up the drawing so that the wires do not lose their starting or ending connections?




Offline Mert

  • Administrator
  • Newbie
  • *****
  • Posts: 41
  • Karma: +5/-0
    • ElectricalOM
Re: Cad Plan Design - Wiring Connections
« Reply #1 on: 05 October 2021, 13:27 »
You can use the fix wiring connections function.