Recent Posts

61

ElectricalOM for New Users / Re: Measuring a known distance

« Last post by Ronniechew on 11 November 2021, 14:49 »

Hi I have never used normal CAD. Where do I type the required distance? Equally when I draw a line how do I know the distance of that line?

62

ElectricalOM for New Users / Re: Measuring a known distance

« Last post by Mert on 11 November 2021, 10:10 »

its like normal cad. copy the symbol move the mouse to the direction, type the distance in metres and press enter. Or draw a line as a guide and the osnap to the end of the line

63

ElectricalOM for New Users / Measuring a known distance

« Last post by Ronniechew on 10 November 2021, 08:51 »

Hello,

Is there a way of measuring a known distance? So say if I wanted to place two lights 1.2 m apart on an already scaled drawing, how would I do that, I know I can measure using the measuring tool between two fixed points but not sure about the former. 

Thank you

64

CAD Plan Design / Re: Wiring - High Level/Low Level Wiring

« Last post by Mert on 22 October 2021, 09:45 »

From the properties on the right hand side, you can edit the elevation of each cable section, if you are working on the same floor/electrical layer.

If you have multiple floor layers, again from the properties on the right hand side you can add extra cable length, see the image attached.

65

CAD Plan Design / Wiring - High Level/Low Level Wiring

« Last post by mbd-uk on 21 October 2021, 14:39 »

I have an installation where the Submain Cable running between 2 DB's, installed at high level and then drops to underground.

Any advice on how to enter these 2 installation levels in CAD plan as a single cable?

Thanks

66

Installation and licence issues / Re: Share licence?

« Last post by Mert on 15 October 2021, 10:29 »

You can watch that video.

https://youtu.be/gdKEB2PGExw

67

Installation and licence issues / Share licence?

« Last post by Ryan_T on 15 October 2021, 10:28 »

Hi,

Is it possible to use a licence between two people, like my colleague? We are business partners actually and we will use the software together. Is it possible to run it on two different computers?

Cheers

68

ElectricalOM for New Users / Re: I missed my saved symbols in new laptop license.

« Last post by admin on 14 October 2021, 14:38 »

Good idea! We will make sure it will be included in the next updates

69

ElectricalOM for New Users / Re: I missed my saved symbols in new laptop license.

« Last post by Sidewinder on 13 October 2021, 18:41 »

It would be a nice feature if these were able to be transferred somehow.
Depending on where these are saved, if that were a cloud drive, such as OneDrive (others are available), which was available and synchronised across the two computers, then EOM could be pointed to this location in the file structure on both devices?
Perhaps something in a "configuration file" to tell EOM where to look?

70

CAD Plan Design / Re: Auto cad colours

« Last post by admin on 13 October 2021, 09:34 »

The default is print by page colour. The print figure colour will bypass the print by page colour and print the figure as it appears on the screen.