ElectricalOM Forum

ElectricalOM Support => CAD Plan Design => Topic started by: RCDGuy on 05 October 2021, 13:27

Title: Cad Plan Design - Wiring Connections
Post by: RCDGuy on 05 October 2021, 13:27

Ran into problem were in designing a circuit the wire loses either its Starting or Ending connections. See attached "Wire_Properties.JPG" for an example.

When the wire is moved and brought back to the original position, the missing field is then filled in again. Is there a way to set up the drawing so that the wires do not lose their starting or ending connections?
(https://i.postimg.cc/G4F3rqVP/Em-Light-Double-Flor.jpg) (https://postimg.cc/G4F3rqVP)

(https://i.postimg.cc/t19qgFGK/Wire-Properties.jpg) (https://postimg.cc/t19qgFGK)

Title: Re: Cad Plan Design - Wiring Connections
Post by: Mert on 05 October 2021, 13:27

You can use the fix wiring connections function.
(https://i.postimg.cc/34yPrwWM/fix-connections.jpg) (https://postimg.cc/34yPrwWM)