41
Installation and licence issues / Re: Importing from Other Software
« Last post by mbd-uk on 12 May 2022, 10:20 »Is there any further comment with respect to the software listed on the original post?
Recent Posts
42
Installation and licence issues / Re: Importing from Other Software
« Last post by mbd-uk on 10 May 2022, 07:52 »I am impressed how this was answered positively, when the answer appears to be "No".
The software that you have listed are not equivalent to Amtech or heavacomp.
The software that you have listed are not equivalent to Amtech or heavacomp.
43
Installation and licence issues / Re: Importing from Other Software
« Last post by Mert on 09 May 2022, 09:59 »Hi mdb-uk,
ElectricalOM can indeed import files from a few software like Tysoft EasyCert, and FastTest.
You can check this YouTube video for further details about FastTest:
https://www.youtube.com/watch?v=m5Qe1gWwxxo&list=PL0V3PVFd0oK0JSA85xzMnPJBGbrIGxhXt&index=24
If you require more details, or want to discuss about any other options, please contact with Modecsoft at support@modecsoft.com
ElectricalOM can indeed import files from a few software like Tysoft EasyCert, and FastTest.
You can check this YouTube video for further details about FastTest:
https://www.youtube.com/watch?v=m5Qe1gWwxxo&list=PL0V3PVFd0oK0JSA85xzMnPJBGbrIGxhXt&index=24
If you require more details, or want to discuss about any other options, please contact with Modecsoft at support@modecsoft.com
44
Installation and licence issues / Re: Licence by Distribution Circuits
« Last post by Mert on 09 May 2022, 09:29 »Hi mbd-uk,
As long as the quantity of distribution circuits are applicable to the licence you have, the project will be opened by ElectricalOM.
Let's say there is a project done by Ultimate version which has 10 distribution circuits. This project can be opened by Ultimate, Advanced, and Professional, but not by Limited as this allows for 4 distribution circuits.
When it comes to add-on modules; if you have the module, then, you are good to go, if you do not have the add-on, then, you will loose the data associated with the add-on module.
As long as the quantity of distribution circuits are applicable to the licence you have, the project will be opened by ElectricalOM.
Let's say there is a project done by Ultimate version which has 10 distribution circuits. This project can be opened by Ultimate, Advanced, and Professional, but not by Limited as this allows for 4 distribution circuits.
When it comes to add-on modules; if you have the module, then, you are good to go, if you do not have the add-on, then, you will loose the data associated with the add-on module.
45
Installation and licence issues / Importing from Other Software
« Last post by mbd-uk on 06 May 2022, 14:43 »Does ElecticalOM have any capability for importing a project that may be done in another software, such as Hevacomp or Amtech?
46
Installation and licence issues / Licence by Distribution Circuits
« Last post by mbd-uk on 06 May 2022, 14:41 »If I create a project in a higher level licence such as "ElectricalOM - Advanced", but it only has 4 Distribution circuits can it be opened in and modified in "ElectricalOM - Limited"?
Also, the reverse?
Also, the reverse?
47
Calculations & Checks / Re: Parallel Conductors
« Last post by bruce.rudd on 06 May 2022, 14:05 »My bad - looking at wrong place. Iz changes.
48
Calculations & Checks / Parallel Conductors
« Last post by bruce.rudd on 05 May 2022, 12:59 »Why does the It -= 247A not reflect the 2 x parallel conductor It = 494A
49
ElectricalOM for New Users / Re: Origin of Supply
« Last post by RCDGuy on 25 April 2022, 11:54 »Well, EOM will require a source to run, however, there is a new component called Unknown network, which I think it is created for that purpose. You insert a supply and then this component. I would get rid of the conductor and protection but that's your choice. Then you can define a PFC and a Ze value at that point and carry on with the system as in your DB after this point.
I hope this helps.
I hope this helps.
50
ElectricalOM for New Users / Origin of Supply
« Last post by robw on 25 April 2022, 11:36 »Hi,
I'm wanting to start a schematic showing the origin of supply as an existing sub distribution board and not a DNO supply.
Please can anyone assist? I'm sure its something obviously that i'm just missing but brand new to this software so figure its just quicker to ask.
Many thanks
I'm wanting to start a schematic showing the origin of supply as an existing sub distribution board and not a DNO supply.
Please can anyone assist? I'm sure its something obviously that i'm just missing but brand new to this software so figure its just quicker to ask.
Many thanks