ElectricalOM Forum

ElectricalOM Support => ElectricalOM for New Users => Topic started by: RCDGuy on 04 October 2021, 09:51

Title: 4-Pole Distribution Block
Post by: RCDGuy on 04 October 2021, 09:51

I am designing a 3ph + N scheme. I want to use a 4 pole distribution block, so I can easily bring in the TPN supply, and use L1, L2 and L3 for 3 different areas.
I could use a 3ph distribution board, but the 3 1ph CCU boxes are quite separated, so I just want to be able to split the supply close to the meter. How do I show this in the scematic?
This is what I was thinking of using
Legrand 125A 4 Pole 6 Module Distribution Block
Part Code: 004886
Stock Code: 0056-4532

Four pole with 4 bars
125A 6 modules
Connection with or without Starfix ferrules
Supplied with short ferrule

Title: Re: 4-Pole Distribution Block
Post by: Mert on 04 October 2021, 09:52

Hello,
You can add a Junction box connection from the 3ph source. Then add the single-phase circuits and set the appropriate phase.

Title: Re: 4-Pole Distribution Block
Post by: RCDGuy on 04 October 2021, 09:55

Here is a picture for you

Quote from: Mert on 04 October 2021, 09:52

Hello,
You can add a Junction box connection from the 3ph source. Then add the single-phase circuits and set the appropriate phase.
(https://i.postimg.cc/CZFLhzBr/Untitled.png) (https://postimg.cc/CZFLhzBr)