ElectricalOM Forum

ElectricalOM Support => ElectricalOM for New Users => Topic started by: tahmed17 on 01 October 2020, 17:10

Title: Calculation the total load of supply
Post by: tahmed17 on 01 October 2020, 17:10

Hi,

After designing the whole schematic , how can I know the total load(Power consumption in Watt)  on the feed?

I can individually add all the load but I want to know if there is a way on the software to calculate the load automatically .

Thanks

Title: Re: Calculation the total load of supply
Post by: admin on 01 October 2020, 19:44

Hello,

The easiest way is to check the load sums tab page as shown in the attachment.

The loads are shown for the selected elements, so having the main board selected will show the total load of the installation.

Please note that the load and generally any calculation is done automatically after you apply a change.

Check also the online tutorial about calculating the maximum demand: https://electricalom.com/app/help/Step2CalculatetheMaximumDemandan.html

I hope that helps